Pro-Ject: Align It DS3 2-Point Phono Cartridge Alignment Protractor

LAB POINTS

• adjust overhang, azimuth and tangentiality on one tool
• align your cartridge using (3) different geometries for different listening habits
• alignment curves for 8,6“, 9“, 10“ and 12“ tonearms
• detailed instructions and tonearm geometry explanation included
• suitable for all Pro-Ject turntables, plus other manufacturer's tonearms (see compatible tonearm length below)
• made in Europe

"Align it DS3 is one of the easiest yet most effective alignment tools available. With it you can adjust and align your cartridges with ease. Different to many other alignment protractors the Align it DS3 traces the whole path of the tonearm from the outer to the inner null-point. This is great for beginners and professionals alike, as it makes alignment much more comfortable. You do not need to constantly rotate your turntable‘s platter when going from outer to inner nullpoint while aligning your cartridge. The Align it DS3 stays fixed in position and you do not need to worry about getting the position right each time. This is the advantage of tracing the whole tonearm arc on the protractor. Align it DS3 is suitable for all Pro-Ject turntables and many other manufacturer‘s turntables and tonearms depending on their pivot to spindle distance." - Pro-Ject

Choose one of the 3 most popular alignment geometries printed on the Align it DS3. Each geometry has different advantages:

• Baerwald: Excellent allrounder that many people choose to start their alignment journey with
• Löfgren B: Maximises tracking in the middle area of your vinyl record, resulting in the lowest average distortion
• Stevenson: Maximises tracking at the start and very end of the record

Suitable for tonearms with the following pivot to spindle distance:

• 200 mm (used on Pro-Ject 8,6” tonearms)
• 212 mm (used on Pro-Ject 9” tonearms)
• 238 mm (used on Pro-Ject 10” tonearms)
• 291.6 mm (used on Pro-Ject 12” tonearms)