Pro-Ject: Sweep It S2 Turntable Record Broom - Black

LAB POINTS

• official Pro-Ject part, follows the grooves during playback and brushes dust + debris out of the way before it reaches your stylus
• highly efficient neodymium magnet stabilizes + adjusts for anti-skating
• uses natural hair instead of carbon fiber / microfiber bristles
• easy to activate + deactivate w/ arm lift + arm rest
• can be used for standard height + taller platters: height adjustable within a range of ~ 1cm
  
• extremely low electronegativity
  

"The Pro-Ject Sweep It is a natural hair broom with a record brush that runs in sync with the tonearm. The record broom removes dust and aids in record care during playback, as your stylus spins on the turntable." - Pro-Ject

S2 vs. E Model

• S2 features neodymium magnet to prevent skating and will track better than the E (E relies on directional inertia of the grooves)
• S2 also works on higher-end turntables with thick / tall platters such as Pro-Ject 2Xperience, X2 B, etc.

TECH SPECS

• arm material: aluminum
  
• tracking force: 6g
• total arm length: 8.9" / 226 mm
• total height: 2.56" - 2.95" / 65 - 75 mm (adjustable to ~ 1cm)
• base diameter: 1.81" / 46 mm
• weight: 0.95 lbs / 430 g

COMPATIBILITY

• The record broom can be placed in one of two left hand side corners of the turntable. The placement is depending on the type and shape of your turntable. At the optimal position the brush should align with the spindle (i.e. the center of the platter). Deviations (relative to the spindle) between 1,5 to 2 cm are well compensated by design of the Sweep it S2. Higher deviations can cause more drastic skating effects.
  
• Please measure your turntable to determine compatibility