Specpatch 15 Fast-Setting Polymer-Modified Concrete Repair Material

SpecPatch 15 is a fast-setting, general-purpose concrete repair mortar for floors, walls, precast, tilt-up, and masonry surfaces

SpecPatch 15 works for horizontal and vertical applications, and can be shaped by shaving or sanding once set. It reaches usable strength quickly, with excellent freeze-thaw resistance and minimal shrinkage.

Key Features & Benefits

• One-component — just add water
• Suitable for horizontal and vertical repairs
• Minimal shrinkage with outstanding freeze-thaw resistance (no scaling after 25 cycles)
• Self-curing under most conditions

Application Instructions

• Ensure the concrete is sound and free of oil, grease, dust, laitance, or other contaminants
• Saw-cut the perimeter 1/8" deeper than the repair depth for a notched, reinforced edge
• Mechanically abrade to a minimum CSP of 5, keeping surfaces SSD with no standing water
• Clean exposed steel reinforcement of rust and coat with SpecPrep SB
• Mix 6.75-7.25 pints of clean water per 50 lb bag with a low-speed drill for 2-3 minutes until homogenous
• Optionally mix with SpecChem StrongBond Acrylic Bonder (neat or 1:1 with water) for thin, high-traffic horizontal applications to boost durability and bond strength
• Finish to match surrounding concrete texture; moist cure for 48 hours, protecting from rain, sun, and wind until 70% of 28-day strength is reached

Technical Data Summary

• Set Time (70°F, ASTM C266): Initial set 15-30 minutes, final set 60 minutes
• Compressive Strength: 1,200 psi at 3 hours, 6,200 psi at 28 days
• Shelf Life: 12 months unopened, stored in a cool, dry place away from sunlight

Packaging

Available in 50 lb bags.

Supporting Documents

Safety Data Sheet (SDS)

Technical Data Sheet (TDS)