Hyperflex 4-Way Hose Kit with Air Command

Product Description

The Hyperflex 4-Way Kit does everything the Recoil kit does — air all four tires simultaneously, set a target PSI and walk away, equalize automatically — but the hoses are straight hybrid polymer instead of coil. That means no spring tension pulling the hose while you're working, no memory holding a shape after storage, and no kinking. Velcro straps keep the hose lines up off the ground while you're airing and bundle them cleanly in the bag when you're done. Rapid Locking Air Chucks handle APEX RPVs, Toyota recessed wheels, metal TPMS stems, and standard valves, and protective caps ship on every chuck. The manifold disconnects for fast setup and breakdown. At 300 PSI rated and -40°F to 175°F operating range, it also carries the highest specs in the EZ FLATE hose kit lineup.

Product Specs

• Hose Style: Straight hybrid polymer — no kink, no memory
• Max PSI: 300 PSI
• Temperature Range: -40°F to 175°F
• Air Chucks: Rapid Locking Air Chucks (with protective caps) included
• Velcro Hose Straps: Included
• Includes: Digital pressure gauge, industrial coupler plug, storage bag
• Manifold: Disconnects from hose kit for easy setup/breakdown

Product Features

• All Four Tires at Once — Set PSI and Walk Away — The Air Command digital gauge lets you dial in your target; the kit equalizes pressure across all four tires automatically and stops when it hits your number
• Straight Hybrid Polymer Hose — No Kink, No Memory — Unlike coil hoses, these lay flat where you put them with no spring tension pulling back; they don't hold a bent shape after storage either, so they're ready to run every time
• Velcro Straps Keep Hoses Off the Ground — Built-in straps hold the hose lines up while you're airing, then bundle everything cleanly into the storage bag so nothing drags through the mud or gets caught under a tire
• Rapid Locking Air Chucks with Protective Caps — Push-on, pull-to-release design works on APEX RPVs, Toyota recessed wheels, metal TPMS stems, and standard valves; every chuck ships with a cap to keep it clean between uses
• 300 PSI / -40°F to 175°F — Highest Spec in the Kit Lineup — Wider pressure and temperature range than the Recoil kit; handles any compressor output and any climate
• Manifold Disconnects for Fast Setup and Breakdown — Unhook the manifold in seconds; no tangling the whole kit every time you pack it away