A Vinyl Sticker Behemoth LOGO White

A white, matte decal with Behemoth Logo design. Designed for applying to a flat, smooth surfaces such as glass (car window or body). Behemoth Webstore does not take any responsibility for damages related to incorrect or failed appliance.

• Make sure the surface you want to apply the sticker to is degreased, dry and clean.
• Peel off the backing paper (opaque layer) so that the design remains attached to the transparent transfer film.
• Place the transfer film with the design onto the chosen surface. Apply slowly and gradually — from top to bottom.
• Press firmly, concentrating on adhering the design to the surface.
• Try to avoid air bubbles or debris when applying.
• Once the sticker is fully applied, slowly peel off the transparent transfer film, leaving the design on the surface.

Width: 20 cm / 7.8''

Heigth: 8 cm / 3.1'' in

• Make sure the surface you want to apply the sticker to is degreased, dry and clean.
• Remove the opaque sticker layer so that the design remains glued to the transparent layer (transfer foil).
• Start applying the decal to the chosen surface. It is best to apply slowly and gradually - from top to bottom.
• When applying, concentrate on pressing the decal to the surface, not the remaining part of the transfer foil to which the decal is glued.
• Try to apply the decal to avoid air bubbles or debris.
• After applying the whole sticker, slowly peel off the transfer paper from the surface, leaving the decal behind.

THE CAR IS NOT BEING SENT WITH THE DECAL