2-Way Patch - Train Sticker Patch - Crossing Gate

[Product Description]
This is a 2-way patch that can be applied either by ironing or by adhesive.
It's perfect for practical use on clothes, bags, & also makes a cute addition to accessories like phone cases.

Iron-On Application:
1. Place the patch in the desired position, cover with a cloth, & ensure the iron doesn't come into direct contact with the fabric.
2. Set the iron to dry medium heat
(150°C-160°C), & press firmly on the patch for 20-40 seconds, making sure to apply heat to all corners.
For stronger adhesion, press from the reverse side.
*Note: When applying to heat-sensitive fabrics like acrylic-based materials, be cautious of the iron's temperature.
3. Do not move the patch until it has completely cooled.
After 24 hours, it can be washed with water.
4. For long-term use or extra durability, it's recommended to sew the patch on.
Adhesive Application:
"1. Clean the area where the patch will be applied to remove dirt & dust.
2. Peel the patch from its backing & press it, adhesive side down, onto the desired area."
*Note: Be careful when applying to paper or leather as the surface may peel off.
"[Care Instructions]
⚪︎Wash by h& in water. Do not use chlorine bleach or dry clean."
⚪︎Avoid using a dryer.
⚪︎For frequent use or heavy wear, or to ensure stronger attachment, sew the patch on.
⚪︎For stretchy, fluffy, or materials that may not adhere well, it is recommended to sew the patch on.
⚪︎Be cautious when removing the patch after it has been applied as adhesive residue may remain.
⚪︎Avoid twisting the iron when pressing.
⚪︎Cannot be applied to waterproof or water-resistant fabrics, or damp/wet surfaces.
Commercial OK

[Size]
height Approx.1.8cm × width Approx.3.5cm × 2
[Material]
Surface: Fabric Polyester
Thread: Rayon
Back: Acrylic Resin
Made in Taiwan