Tenax Ager (Color Enhancer)

Tenax Ager is a resin-based color enhancing stone sealer that deepens color and gives natural stone a permanent wet look

Features

• Enhances color
• Leaves a permanent wet look on stone surfaces
• 1 Liter covers 160 - 180 square feet
• Drying time is about 60 minutes
• Water-repellent effect within 24 hours from application
• Ager Tiger is available in case

Tenax Ager Sealer is a resin-based color enhancing stone sealer like no other. It brings out a fuller richer color on the stone, while hiding small scratches. It does not polish stone, but gives it the "wet" look, a great way to cheat when you are polishing hard to reach spots. Tenax Ager Sealer will also solve the problem of color matching between a polished surface previously resigned and the lighter colored polished edge of the same material. Tenax ager is generally applied to sanded or smoothed surfaces to give a wet look. It can also be applied to polished surfaces color enhancer. Apply the Tenax Ager Sealer to marble, granite and stone of all types. Suitable for indoor and outdoor use. Tenax Ager Sealer is an excellent product for sealing all natural stone! The Ager will enhance and deepen the color of the stone. Once it dries, it will give your stone total protection against stains!

Instructions

Using a paintbrush, cloth, fleece, or sponge applicator, apply Tenax Ager undiluted to a completely clean and dry natural stone surface. Allow the material to naturally absorb the Ager evenly. Within a few seconds of application, wipe off any Ager that was not absorbed into the natural stone material using a clean cloth or sponge. Avoid applying Ager in direct sunlight. Wait 24 hours after treatment for finished surface. In the case of treating natural stone surfaces that receive foot traffic, do not walk on treated surface for 4-6 hours after treatment.

• UV Resistant
• Non-Yellowing
• Stain Resistant
• Enhances Color Tone
• Helps Protects Against Graffiti

Compatible Materials

Tenax Ager is a color and grain enhancer, and sealer designed for adding beauty to all sorts of natural stone surfaces including the following materials:

• Marble
• Granite
• Limestone
• Sandstone
• Quartzite
• Travertine
• Agglomerate
• Rosso Verona

Specifications

• Density at 25°C gr/cm²: 0.95
• Appearance: Opalescent Liquid
• Color: Colorless

WARNING: Tenax Ager does not provide anti-etch protection on marble surfaces. Use of acidic substances such as wine, tomatoes, citrus, coffee, etc. will etch the surface by creating a chemical reaction with eh calcium carbonate present in marbles. For etching problems use Tenax TeEtch

Coverage

The consumption greatly depends on the porosity of the material being treated. Each type of natural stone varies in porosity. Additionally, stones vary in porosity even if they are the same type. The following list gives some general coverage guidelines for some stone.

**Please note air shipping will not be available with this item.