Bonastre Polibrill

When the surface presents severe damages such as deep scratches, scratches and stains, it is time to use Bonastre Pro, using only water these diamonds manage to restore the surface without risk of damaging it and in a very easy way, to complete the polishing process we recommend using the yellow and green pad, the results will surprise you.

Polibrill

Polish and restore marble, travertine, limestone, concrete and terrazzo with Bonastre’s Polibrill resins. Restore the surface from deep scratches and heavy wear all the way to bring the shine back! Restore your countertops, bathrooms, tables, stairs, corners or any small or difficult to reach area. Perfect for homes, hotels, institutions and stone care professionals. Easy to follow instructions.

• Use with a variable speed hand polisher.
• Eco-Friendly system, no chemicals needed

Instructions:

Use clean water with each step. Avoid using the abrasives without water! When using a variable speed hand polisher, always adjust to low speed to avoid burning the resins.

- Polibrill Step 0 - Black - This first step will remove deep scratches, etch marks and heavy wear. Add clean water and work the area at least 10 to 20 passes making clockwise circular movements until the surface becomes a consistently matte finish and you are sure that the damage was removed. Rinse and dry the surface, inspect for uniformity.
- Polibrill Step 1- Red - Removes acid etches and light scratches and wear, leaves a smooth matte finish. Use clean water and work the area at least 10 to 20 passes, making clockwise circular movements. Rinse and dry the surface, inspect for uniformity. Make sure there are no scratches left from the previous step.
- Polibrill Step 2 - Brown – Prepares the surface to be polished and leaves a satin finish. Use clean water and work the area with at least 10 to 20 passes, making
clockwise circular movements. Rinse and dry the surface, inspect for uniformity. Make sure there are no scratches left from the previous step.
- Polibrill Step 3 - Yellow - Use it to obtain a gloss 1,500 grit finish, you should be able to see a nice gloss and clear reflection from an angle. Use clean water and work the area at least 10 to 20 passes, making clockwise circular movements.
Rinse and dry the surface, inspect for uniformity. Make sure there are no scratches left from the previous step.
- Polibrill Step 4 - Gray - High Gloss Polish to achieve a “mirror” or wet look finish. Use clean water and work the area at least 10 to 20 passes, making clockwise circular movements. Rinse and dry the surface.

Step 5  –  It’s recommended to finish the polish with Bonastre’s Green pad to achieve a perfect clarity and remove any swirls mark left by the resins after Polibrill’s step 3 or 4.