Spectilt Ex Quick-Drying Reactive

SpecTilt EX is a quick-drying, chemically reactive bond breaker that gives tilt-up panels a clean, easy lift with no residue or discoloration

SpecTilt EX's unique solvent blend dries fast even in cool, damp climates, while staying VOC compliant (under 350 g/L) in OTC/LADCO/MRPO regions.

Key Features & Benefits

• Fast-drying for improved productivity in cool, damp climates
• Chemically reactive for clean panel lifts
• No residue, stain, or discoloration
• Resists foot traffic abrasion
• OTC/VOC compliant, under 350 g/L

Application Instructions

• Ready to use; do not dilute
• For curing new concrete, apply immediately after final steel troweling once surface water has evaporated, covering the slab at 200-400 sq ft/gal per ASTM C309
• For bond breaker coats, apply on a well-cured, smooth, dense casting slab — first coat by spray at 400 sq ft/gal, second coat at 500-700 sq ft/gal at right angles once dry
• On old or water-cured concrete, flood the slab with water, remove excess, then apply at 300-500 sq ft/gal, with a second coat as needed
• Test readiness by dripping water — it should bead up like a waxed car surface
• Clean tools and sprayers with SpecChem Berry Clean or Orange Peel

Technical Data Summary

• Shelf Life: 2 years from manufacture date when stored properly

Packaging

Available in 5-gallon pails (also offered in 55-gallon drums).

Supporting Documents

Safety Data Sheet (SDS)

Technical Data Sheet (TDS)